GE-302H Brass Water Flow Sensor

GE-302H flow sensor is a device for sensing the rate of fluid flow. The GE-302H water flow monitor sensor is produced by Brass material, stability and sensitive, widely used in HVAC system, water heating system, water treatment system, to calculate the flow rate. CE certification.

It is installed in the water heater inlet, used to detect water flow, when the water through flow rotor components, Magnetic rotor rotation and speed changes with the flow, hall sensor output pulse accordingly. Signal feedback to the controller by the controller to judge the size of the water flow, adjust and control.

Specification:
1. Brass Material, stability
2. Pipe Size: BSP1/2" male thread + female thread
3. Flow Range: 1-30L/MIN
4. Voltage: DC3V ~ DC18V DC5V is standard, DC24V is availbale
5. Pulse duty factor: 50%
6. Accuracy: ±3%
7. High Level of Pulse Output: >4.5V (DC5V)
8. Low Level of Pulse Output: <0..5V (DC5V)
9. Max Pressure: 17.5bar
10. Insulation Performance: 100MΩ
11. Hall Component, made in Japan

Drawing

Point Chart of Flow Sensor:

Flow Sensor Range:  1.0L/min - 30L/min 
F=8.1xQ-3  ±3%    F= Frequency Hz;   Q=Liter per Minute