Water Analyzer

  • MLSS Suspended Solids Sludge Concentration Meter
MLSS Suspended Solids Sludge Concentration Meter

MLSS Suspended Solids Sludge Concentration Meter

  • auto clean by air blow
  • Product description: MLSS Suspended Solids Sludge Concentration Meter,optical principle of infrared light's absorption and scattering, the sensor will auto clean by air blow, the controller will control the clean time an
  • ISO9001 & ISO14001 & IS045001
Adopting the optical principle of infrared light's absorption and scattering, the transmitter could get the concertration of suspended solids and sludge. The MLSS optical sensor directs some focused beams into the monitored water, The light beams reflects off particles in the water, and the resultant light intensity is measured by the MLSS optical sensor's photodetector. The suspended solid concertration is directly proportional to the scattering and absorption, when the infrared light go through the liquid.

The MLSS suspended solids concentration meter is suitable for the measurement of suspended solids (sludge) concentration in municipal sewage or industrial wastewater treatment process, it is one industry online analytical instruments. It could used to monitor the concentration of sludge in the waste water treatment, control the sludge discharge in primary and secondary sedimentation tank, control the automatic reagent feeding system in sludge thickening tank and sludge dewatering. it could avoid the water quality deterioration and sludge denitrification & digestion.

Character:
* Multiple beam compensate with each other, eliminate error, improve the precision
* Easy install, stability, low maintenanceMLSS Suspended Solids Sludge Concentration Meter
* The function of air blow cleaning for the transmitter
* 4~20mA isolating current output, high/low limit alarm

* Automatic diagnosis, easy calibration


Adopting the optical principle of infrared light's absorption and scattering, the transmitter could get the concentration of suspended solids and sludge. The MLSS optical sensor directs some focused beams into the monitored water, The light beams reflects off particles in the water, and the resultant light intensity is measured by the MLSS optical sensor's photo-detector. The suspended solid concentration is directly proportional to the scattering and absorption, when the infrared light go through the liquid.


Model Number

GE-138B

Measurement range

0500mg/L5000mg/L; 050g/L100g/L

Measuring method

Infrared light 90 or 180°

Temperature range

050.0

Accuracy

0.001mg/L; 0.01g/L

Precision

±1% F.S

Temp compensation

Auto or manual

Stability

Drifting every week0.5%F.S

Isolated current

Two output  4-20mA or 0-20mA

Communication

RS485 MODBUS RTU

Other Function

Data record/graphic display/data upload

Alarm relay

Three 3A 240VAC/3A 28VDC or 120VAC

Power supply

85265VAC936VDC power3W

Dimensions

144*144*118mm

Installation

Dimension of the recess:138x138mm or Wall-hung

Protection grade

IP65




Optional Function: Auto Clean

Connect the auto clean port with a air pump, the sensor will auto clean by air blow,  the controller will control the clean time and times.


Auto Clean MLSS Sensor